Webdesign by elf42 Webdesign by elf42

Building bearings

Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Cimax®

Cimax® was developed to provide effective protection against disturbing vibrations acting on buildings supported below ground water level. It is a further development of the proven Cibatur bearing.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Cibatur®

The profiled Cibatur® mat consists of a fabric reinforced elastomeric plate (sandwich construction) that has underneath truncated cone-shape resilient studs.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Cipremont®

Calenberg Cipremont® consists of a plate with resilient cylindrical studs; the 15 mm thick plate has studs only on one side, thicker plates on both sides. It consists of NR, is temperature resistant from -30° up to +70° and does not absorb water.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Cisador®

Cisador is used for vibration isolation of buildings or machinery. It is made of closed-cell EPDM material and is generally laid in two layers each 15 mm thick.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Civerso

Civerso is a microcellular EPDM with low water absorption. The closed, microscopically small voids guarantee deformations in the direction of the plane. This is necessary to protect the vertical areas against vibration.


Web Design by elf42

Trade fairs and exhibitions 2017

ConTech 2017

29.11. - 01.

December


webdesign by elf42