Webdesign by elf42 Webdesign by elf42

Machine support bearings

Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Ciditan®

Ciditan® Impact Isolators are multilayer resilient pads which have a sandwich construction and consist of compressible textile damping layers and incompressible elastic layers.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Cires®

Cires® is a further development made of proven materials and is used for vibration isolation of all types of machines. The special profile provides an almost constant natural frequency even for different loads.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Cisador®

Cisador is used for vibration isolation of buildings or machinery. It is made of closed-cell EPDM material and is generally laid in two layers each 15 mm thick.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Citelbrong®

Calenberg Citelbrong® is a profiled resilient strip which is used for protection against vibration and structure-borne noise. Due to the favourable ratio of compression stiffness to shear stiffness Citelbrong® is almost ...


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Cibatur®

The profiled Cibatur® mat consists of a fabric reinforced elastomeric plate (sandwich construction) that has underneath truncated cone-shape resilient studs.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Cipremont®

Calenberg Cipremont® consists of a plate with resilient cylindrical studs; the 15 mm thick plate has studs only on one side, thicker plates on both sides. It consists of NR, is temperature resistant from -30° up to +70° and does not absorb water.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Civerso

Civerso is a microcellular EPDM with low water absorption. The closed, microscopically small voids guarantee deformations in the direction of the plane. This is necessary to protect the vertical areas against vibration.


Web Design by elf42

Trade fairs and exhibitions 2017

ConTech 2017

29.11. - 01.

December


webdesign by elf42