Ciparall® Sliding Bearing
Calenberg Ciparall® Sliding Bearings combine sliding and deformation properties of the bearing where the sliding action is independent from the deformation. Horizontal displacements of the structural members are transmitted by relative movements (sliding) whilst angular rotations and stress relief are taken up by permanently elastic pads.
Transverse tensile forces, flatness imperfections of surfaces and creep deformations are not transmitted to the sliding layer; the dimensionally stable sliding plane remains level and parallel whilst the sliding properties are maintained. This is a precondition for the functionality and operational safety.
For structural members subject to predominantly static loading and larger displacements.
Text of Tender document
Supply Calenberg CIPARALL® Sliding Bearing RP (glass fibre reinforced plastic) for BnF (precast concrete unit) or OBn (in situ concrete construction) with transverse tensile reinforced as well as dimensionally stable sliding plane and permanently elastic, deformable element, with a loading capacity of up to 15 N/mm² depending on size, general building authority test certificate no. P-852.0290-4.
Supply Calenberg CIPARALL® Sliding Bearing ST, for BnF or OBn with transverse tensile reinforced as well as dimensionally stable sliding plane and permanently elastic, deformable element, with a loading capacity of up to 15 N/mm², standard building authority test certificate no. P-852.0290-4.
CIPARALL®-Sliding Bearing RP
CIPARALL®-Sliding Bearing ST
Maximum compressive stress
Calenberg Ingenieure GmbHAm Knübel 2-4
+49 5153 9400-0
+49 5153 9400-49