Webdesign by elf42 Webdesign by elf42

Compact Bearing CR 2000

Calenberg Compact Bearing CR 2000 is a modification of the CR Compact Bearing H which has been tried and tested for decades. It is the first structural bearing with a design concept. It consists of chloroprene with a Shore hardness A of 70 ± 5.

The wafer-like bearing surface leads to a low-stress compression compensation during the loading phase. The transverse tensile and splitting tensile forces caused in the adjacent structural members are reduced as compared to smooth elastomeric plates.


For structural members subject to predominantly static loading

Text of Tender document

Supply Calenberg Compact Bearing CR 2000, an unreinforced homogeneous elastomeric bearing according to DIN 4141 part 3, bearing class 1 and 2; can be loaded depending on size to an average compressive stress of up to 20 N/mm², general building authority test certificate no. 850.0425, national technical approval no. Z-16.32-435.


Length: mm
Width: mm
Thickness: mm
Quantity: item
Price: €/item

enclosed in polystyrene or Ciflamon

Overall width: mm
Core width: mm
Thickness: mm
Quantity: m
Price: €/item bzw €/m

Technical Data

Bearing thickness:

  • 11 mm
  • 16 mm
  • 21 mm

Maximum compressive stress:

  • up to 20 N/mm²,
    depending on size

Web Design by elf42 webdesign by elf42
© Webdesign by elf42 & Calenberg Ingenieure GmbH, Salzhemmendorf - Elastomeric sliding bearings | Sitemap