Webdesign by elf42 Webdesign by elf42

Building Construction - statically loaded structural members

Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

bi-Trapez Bearing®

Unreinforced elastomeric bearing can be loaded irrespective of size, the material is quality controlled.

bi-Trapez Bearings® are unreinforced profiled elastomeric bearings, available in four thicknesses.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Cigular® Slab Bearing

Calenberg Cigular® Slab Bearing is a thermally insulated, permanently resilient element with shear deformation properties for the support of reinforced concrete floors on load bearing structures according to DIN 18 530.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Compression Bearing

Calenberg Compression Bearing is an unreinforced elastomeric bearing with smooth contact surfaces in compression.

It is made of viscoelastic, ozone resistant elastomeric material with a Shore hardness A = 65 ± 5.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Ciparall® Sliding Bearing

Calenberg Ciparall® Sliding Bearings combine sliding and deformation properties of the bearing where the sliding action is independent from the deformation.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Civalit® Sliding Bearing

The 8.5 mm thick bearing has transverse tensile reinforcement and is made of an elastomer which is based on chloroprene with a vulcanized PTFE sliding layer.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Compact Bearing CR 2000

Calenberg Compact Bearing CR 2000 is a modification of the CR Compact Bearing H which has been tried and tested for decades. It is the first structural bearing with a design concept.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Compact Bearing S 65

The Calenberg Compact Bearing S 65 is an unreinforced bearing with smooth compression contact areas. It consists of a viscoelastic ozone resistant elastomeric material with a Shore hardness A of 65 ± 5.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Compact Bearing S 70

Calenberg Compact Bearing S 70 is an unreinforced elastomeric bearing with smooth compression contact areas. It consists of a viscoelastic, ozone resistant elastomeric material with a Shore hardness A of 70 ± 5.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Perforated™ Bearing 205

The Calenberg Perforated™ Bearing 205 is a heavy duty unreinforced elastomeric bearing which can be used wherever large forces are transferred to relatively small areas.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Perforated™-Sliding Bearing

The Perforated™ Sliding Bearing consists of several layers of elastomer and intermediate layers of weather-resistant steel, grade WTSt 52-3.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Perforated™-Bearing, ST

The steel-reinforced Perforated™ Bearing ST consists of several layers of elastomer and intermediate layers of weather-resistant steel, grade WTSt 52-3, bonded together to form a composite laminated spring.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Perforated™ Bearing, Type Z

The Perforated™ Bearing Type Z consists of several layers of elastomer and intermediate layers of weather-resistant steel, grade WTSt 52-3.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Perforated™ Sliding Bearing, Type Z

The Perforated™ Sliding Bearing Type Z consists of several layers of elastomer and intermediate layers of weather-resistant steel, grade WTSt 52-3.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Compact Core Bearing

The Calenberg Compact Core Bearing is an unreinforced heavy-duty elastomeric bearing with a smooth surface. The distinguishing external feature of the bearing is the reddish brown colouring of the material.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Sandwich Bearing Q

The Calenberg Sandwich Bearing Q is a steel reinforced elastomeric bearing. It has elastomeric layers which are connected by transverse tensile reinforcement of weather resistant steel.


Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

Cipolon® Edge Protection

Highly compressible material to level out any unevenness and to prevent ingress of concrete during concreting of filigree floor slabs.


Web Design by elf42

Trade fairs and exhibitions 2017

ConTech 2017

29.11. - 01.

December


webdesign by elf42