Webdesign by elf42 Webdesign by elf42

2013 Nachterstedt, Aluminium recycling works NOVALIS

The production hall of the recycling works was built using precast reinforced concrete units. The column and beam system incorporates a large number of heavy-duty Perforated-ST elastomeric bearings (allowable compressive stress 25 N/mm²).

Calenberg Ingenieure designs, manufactures and markets elastomeric sliding bearings, and statically or dynamically loaded structural bearings (elastomeric bearings) for buildings and structures, sub-ballast mats and trackbed mats for track construction as well as other elastomer-based products for noise insulation and environmental protection.

These bearings transfer the high vertical loads carried by the reinforcement in the components and accommodate changes in length and bending rotations. Damaging effects, such as localised spalling or cracking of the concrete, are prevented.

Web Design by elf42
webdesign by elf42
© Webdesign by elf42 & Calenberg Ingenieure GmbH, Salzhemmendorf - Elastomeric sliding bearings | Sitemap